Stewart Filmscreen –
Balón
19
ATTACHING THE BORDER TRIM (BALÓN EDGE ONLY)
Use the following steps to connect the border trim to the Balón Edge.
1.
Unscrew the preinstalled cap screws on the frame.
2.
Place front edge of the border onto the screen material.
3.
Make sure the border trim is centered along the side on the screen.
4.
Keeping your fingers off of the screen material, lay trim piece into place.
5.
Secure the trim in place using screws previously removed during Step 1 (see Figure 14).
Figure 14: Border trim installed onto frame
