AT 3.0
9
INSTALLATION: AT FRAME (CONTINUED)
ATTACHING THE SCREEN TO THE FRAME—GENERAL PROCEDURE
The general procedure for attaching AT3 screens to the frame is the same for all mounting and screen
types Specific notes for wraparound screens and owner-supplied frames follow this section
Attach the screen to the top left corner of the frame first, then along the top, then the sides, then the
bottom Read the tips and follow the sequence
Tips for attaching the screen to the frame
Read all instructions prior to beginning Have all tools and equipment ready
`
`
During packing and transit, the screen may shrink The Stewart screen material has some elasticity,
and will stretch and spring back The grommeted edge binding will not stretch past the manufactured
outer dimensions After the screen is attached to the frame, some tension will be apparent at each
grommet If you have concerns, read the section “This Screen Seems Too Small ”
`
`
At least one person on a scaffold or lift and one person on the floor must work together to rotate
the screen cylinder to unroll the screen You may need another person on the ground to move the
scaffold or lift
`
`
Handle the screen carefully Avoid contact of the screen fabric with fingernails Grasp the screen
edge binding only
Figure 7: Attaching T-stands
Figure 8: Attaching cross braces
