Empennage Construction
☐
Assemble with thin CA, parts H1-H5 and “B”
trusses to create the Horizontal Stabilizer.
☐
Assemble with thin CA two Elevator halves
from parts E1-E5 and “C” trusses.
☐
Connect Elevator halves with the hardwood
Elevator Joiner E6. Bond with thick CA.
☐
Bevel leading edge of Elevator at a 45 degree
angle in preparation for hinging.
☐
Build Vertical Stabilizer and Rudder from
parts V1-V3 and RD1-RD5 and “A” trusses.
☐
Bevel leading edge of Rudder at a 45 degree
angle in preparation for hinging.
SkyBuggy © 2010 Stevens AeroModel all rights reserved.
Page 8 of 30
H1
H2
H3
H4
“B” Trusses
E1
E2
E3
E4
“C” Trusses
Elevator Joiner
V1
V2
V3
RD1
RD2
RD3
RD4
“A” Trusses
45 degrees
45 degrees
H5
H3
H5
E5
RD5
E6
Top
Bottom
Right
Left
