stertil-KONI ST 1065-FWF, Service And Parts Manual

Page: 56 / 132

Service and Parts manual (Version B) 56 Wireless
the data that has just been input. In both cases, the user administration screen will
appear on the display again.
3. Now press the [BACK] button twice followed by the [START] button once; this will
take you back to the main screen.
Add new user
1.
To add a new user, press the [ADD] button. The screen for inputting a user's data
then appears. This screen is the same as the one in section Edit user (on page
43) .
2. Enter the user's data and press the [CONFIRM] button to confirm and save the
data that has been input. Press [EXIT] to go back to the old data without saving
the data that has just been input. In both cases, the user administration screen will
appear on the display again.
3. Now press the [BACK] button twice followed by the [START] button once; this will
take you back to the main screen.
Delete user
1.
To delete a user, select the desired user and press the [DELETE] button.
2. Press the [CONFIRM] button to confirm the deletion and remove the data
permanently. Press [EXIT] to leave the selected data intact without deleting it. In
both cases, the user administration screen will appear on the display again.
Assign ID key
If the option of logging users in with an ID key has been chosen, an ID key can then
be assigned to a user:
1. Hold the desired ID key up to the antenna.
2. Select the desired user.
3. Press the [ASSIGN ID KEY] button.
4. Press the [CONFIRM] button to confirm and save the designation just made. Press
[EXIT] to quit without saving the designation just made. In both cases, the user
administration screen will appear on the display again.