10
BaTTERY REPlacEMENT
1. carefully open the battery box.
2. Remove the old battery.
3. Replace the used battery with a new 9V battery. a lithium battery is
recommended.
Note:
do not allow moisture or water
into the system
4. close the box.
5. In order to avoid entering into the
adjusting mode, wait 10 seconds
before operating the system.
maIntenance
Filter cleaning instructions
the touch is provided with one stainless steel filter preventing foreign particles to
enter the lines. If the water flow has decreased, this may be because the filter is
clogged. the filter can be cleaned as follows:
1. shut-off the water shut off valve.
2. disconnect the water supply inlet from the adapter at the solenoid valve
housing.
3. Remove the filter from the adapter and wash it under running water.
4. Reassemble the parts.
5. Reconnect the solenoid valve housing and restore the incoming water
supply.
6. make sure that there is no water leakage.
Care and cleaning of chrome and special finishes
DO NOT
use steel wool or cleansing agents containing alcohol, acid, abrasives, or
the like. use of any prohibited cleaning or maintenance products or substances
could damage the surface of the faucet. For surface cleaning of faucet us
ONLY
soap and water, then wipe dry with clean cloth or towel. When cleaning bathroom
tile, the faucets should be protected from any splattering of harsh cleansers.
Important:
spent batteries should not be disposed of with
normal household waste. contact your local authority for
information on waste disposal and recycling.