Stern 07292055, Installation And Maintenance Manual, Page: 8 / 19

12 13
lIquId SoaP dISPenSeRS
REMOTE cONTROL FUNcTIONS
lIquId SoaP dISPenSeRS
Top Multifeed Cap Kit 07270214
Soap Filling Kit 07260032
Input Plug Kit 07260034
Coupling cap for 6 tubes and accessories 07270236
Soap Tank 6L 07100023
Soap Tank Support 07055223
12V Transformer EU plug 06522081
12V Transformer UK plug 06522086
12V Transformer US plug 06522080
12V Transformer AU plug 06522085
12V Transformer Universal (EU/UK/US) plug 06522082
10-pack Sensor Kit MF Smart, Trendy, Elite, Extreme, Swan SD 07220339
10-pack Sensor Kit MF Green SD 07220340
10-pack Sensor Kit MF Green 28, Tubular, Tubular 2030, Quadrat, Quadrat 2030 SD 07220322
10-pack Sensor Kit MF Smart, Trendy, Elite, Extreme Plus SD 07220350
Pump assembly MF Smart, Trendy, Elite, Extreme, Green, Green 28, Swan, Plus SD 07222015
Pump assembly MF Tubular, Tubular 2030, Quadrat, Quadrat 2030 SD 07222020
Seals and Screws Kit MF Smart, Trendy, Elite, Extreme, Plus SD 07210088
Seals and Screws Kit MF Green SD 07210143
Seals and Screws Kit MF Green 28 SD 07210164
Seals and Screws Kit MF Swan SD 07210140
Seals and Screws Kit MF Tubular SD 07210098
Seals and Screws Kit MF Tubular 2030 SD 07210150
Seals and Screws Kit MF Quadrat SD 07210155
Seals and Screws Kit MF Quadrat 2030 SD 07210128
Remote Control for Soap Dispenser 07100008
SPARE PARTS LIST
If you acquired the remote control together with your soap dispenser, you may adjust
the dispenser settings if required. To use the remote control hold it straight in front of
the sensor at a distance of about 10-15 cm (4-6”).
Attention: The remote control held out of the recommended range (too close or too far)
will not operate.
The remote control can be used to adjust the following functions:
1-SOAP qUANTITY
The 1-4 drop keys allow the user to choose the desired soap quantity.
4
2.1 to 2.3 *
3
1.6 to 1.9
2
1.2 to 1.6
1
0.7 to 0.9
Indication: continuous blinking of the LED in the sensor eye.
*The exact dosage depends on soap viscosity.
2
3
1
4
2-ADJ
This function resets the sensor back to factory
settings.
Indication: 2 blinks of the LED in the sensor eye.
3-TEMPORARY OFF FUNcTION
This function is ideal to perform any kind of activity
in front of the sensor without operating the system
(for example, cleaning). The soap dispenser will
remain shut for one minute when this button is
pressed once.
To cancel this function and to return to normal
operation press the On/Off button again or wait for
one minute.
Indication: OFF – 2 fast blinks, ON – 4 fast blinks
4-FILL THE SOAP TANK
Once the soap tank has been filled / re-filled, press
the FILL button. The pump will run for one minute
for priming the soap to the soap dispenser spout.
To stop this activity press the FILL button again. If
the soap has not started coming out of the spout,
press the Fill button again.