Stern 07292055 Installation And Maintenance Manual Download Page 2

1

INDEX

PAcK cONTENTS

Familiarize yourself with the part names and ensure all the parts are included in your 

package.

MF deck Mounted dISPenSeRS

foam

soap

1 X FOAM cOMPRESSOR

(FOR FOAM vERSION ONLY)

1 X MF PUMP ASSEMBLY WITH 

PUMP SUPPORT AND 3M PIPE

12v  

TRANSFORMER

1 X BODY AND FIXING 

AccESSORIES

1-2 

LIQUID/FOAM DISPENSERS

 

PACK CONTENTS

TECHNICAL DATA

PRE-INSTALLATION INFO

              LIqUID SOAP DISPENSERS

5-7 

TECHNICAL DRAWINGS

8-11 

INSTALLATION

12 

REMOTE CONTROL FUNCTIONS

13 

SPARE PARTS LIST

14-15 

TROUBLE SHOOTING

              FOAM SOAP DISPENSERS

16 

TECHNICAL DRAWINGS 

17-21 

INSTALLATION

22 

REMOTE CONTROL FUNCTIONS

23 

SPARE PARTS LIST

24-26 

TROUBLESHOOTING

              TOP FILLING MULTIFEED KIT

27 

MULTIFEED KIT PACK CONTENTS

28-29 

INSTALLATION

30             

FILLING THE SOAP TANK

31 

LIMITED WARRANTY

32 

MAINTENANCE

The information in this document reflects products at the date of printing. stern Engineering Ltd  reserves the right,  subject to all applicable laws, at any time, at its sole discretion, 

and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the 

forgoing from the market. all information in this document is provided “as is” without warranty of any kind, either expressed or implied, including but not limited to any implied 

warranties of merchantability, fitness for a particular purpose, or non-infringement. stern Engineering Ltd  assumes no responsibility for errors or omissions in the information 

presented in this document. In no event shall stern Engineering Ltd  be liable for any special, incidental, indirect or consequential damages of any kind, or any damages whatsoever 

arising out of or in connection with the use or performance of this information. The tradenames, trademarks, logos and service marks presented in this document, including their 

design, are the property of stern Engineering Ltd or other third parties and you are not permitted to use them without the prior written consent of stern Engineering Ltd  or such 

third party as may own them.

Summary of Contents for 07292055




















Reviews: