21
It is important to provide one Earthing
sleeve for each pump existing on the filtration
system.
Place an earthing rod in a location that retains
humidity (in a watered rock, at the bottom of
a tree, etc.).
Connecting the Earth to the Earth
of the house is prohibited for safety reasons.
This installation of the Earthing sleeve
constitutes the earthing of the pool water and
not the earthing of the equipment.
You must connect the Earthing sleeve to
the Earthing rod using an Earthing braid with a
section of at least 20 mm2.
7. UPKEEP INSTRUCTIONS
If the recommendations regarding the
installation conditions have been respected,
the upkeep of the device should be limited.
Cut off the power supply before any
intervention.
However, periodic cleaning of the
equipment with a dry cloth is recommended
(do not use aggressive chemicals that could
damage the equipment, particularly on the
transparent part of the front face).
As with all electrical equipment, a certain
number of periodic checks must be carried out
(every quarter):
check of the electrical connections
check of the conditions of the cables
8. STORAGE – TRANSPORT
Your device must be stored and
transported in its original packaging in order
to protect it from any damage.
The package must be stored in a dry
environment, free of dust and protected from
any chemical compounds.
Ambient conditions for transport and storage:
Temperature: -10 °C to 40 °C
Air
humidity:
Below
60%
without
condensation
PUMP
20 mm cable earth
minimum towards separate
earthing rod
Main drain
Skimmer
Brush socket
Swimming pool
backflow
Towards drains
Filter
Assembling an earth
Summary of Contents for Sel
Page 2: ...2 ...