14
6. 4-20mA output (optional):
For those looking for the capability to transmit the UV intensity data to a remote
location via a 4-20 mA signal, an optional “Y” cable is available from your dealer
(Figure 5A). Please order PN 260134. This “Y” cable comes with 20 meters (65‘)
of cable for the 4-20 mA signal. To install, first remove the existing sensor cable
from the Cobalt”Plus” controller (Figure 5B) and affix the new “Y” cable
(Figure 5C). Next, attach the “male” end of the existing sensor cable to the
“female” end of the new “Y” cable. Appropriately attach the 4-20 mA cable to
the applicable equipment and ensure all connections are hand-tight.
Figure 5a
Figure 5b
Figure 5c
