6
ESPECIFICACIONES
Para trabajos finos de detalle, grabado, tallado, retoque y
acabado. Úselas en madera, jade, cerámica, vidrio y
piedras semipreciosas. Las puntas están cubiertas con
partículas de diamante.
Alimentación:
5 V - - - 500 mA (x USB)
Batería interna:
3,7 V - - - 600 mAh
Autonomía máxima:
100 min
Velocidad:
baja 5 000 rpm, media 10 000 rpm, alta 15 000 rpm
Diámetro de minidrill:
Ø 2,4 mm / Ø 3,2 mm
Se utiliza con las lijas y sirve para dar forma y suavizar
superficies de metal o plástico.
Para grabar y labrar madera, fibra de vidrio, plástico o
metal blando.
Se utiliza para limpiar el polvo después de grabar o
esculpir.
Se utilizan para el tratamiento superficial de piezas
metálicas, piezas de metal fundido, costuras de soldadura
y para la eliminación de óxido.
FUNCIÓN DE LAS PIEZAS
NO utilice las piezas sobre hierro.