Page 18
Configuration Guide
A100K10333 v.5.5
AudioCodes-114/118
6 MISCELLANEOUS
FEATURES
6.1 Incoming Calls in Private
Incoming calls from the telephone line can be forced to be in private
ringing mode, independent of the private/open switch of the intercom
station
.
Check the flag
Incoming calls from SIP in private ringing mode
in
AlphaPro, (
Exchange & System > System > VoIP
).
6.2 Door Opening Feature
During a conversation between a door station and a telephone, the
telephone operator can activate the
Door Opening
feature in the
AlphaCom by pressing digit 6.
6.2.1 SIP Gateway configuration
To enable digit actions from the telephone line during conversation, set
‘
1
st
Tx DTMF Option’
to ‘
INFO(Cisco)’
in the 'DTMF & Dialing' page.
(
Configuration
tab >
Protocol Configuration
menu >
Protocol
Definition
submenu >
DTMF & Dialing
page item).
6.2.2 AlphaCom
configuration
The Door Opening feature is programmed in the Event Handler. There
are two separate events for the door opening feature, depending on who
is the calling side:
z
calling from the telephone to the door
z
calling from the door to the telephone
Calling from the telephone to the door:
The
Standard
door opening event is used.
Calling from the door to the telephone:
When the phone presses digit 6, the event type
Event Trigger Feature
(15) is reported, with the digit 6 as sub event. The calling AlphaCom
station is
Event Owner
, and called SIP phone number and node number
is
Related To
. The RCO pulse time is specified as an additional
parameter in the RCO action string, i.e.
RCO 3 ON 2
0 means pulse
RCO 3 for 2 seconds.
