Page 12
Configuration Guide
A100K10333 v.5.5
AudioCodes-114/118
3.8 Telephone Network to AlphaCom
You can choose between three different ways of handling an incoming
call from the telephone line:
z
Selective Dialing
z
Automatic Dialing
z
Delayed Automatic Dialing
3.8.1 Selective
Dialing
A second dial tone will be presented when calling in, and the user can
dial the desired intercom number. The fields in the ‘Automatic Dialing’
page item must be left blank (Default setting).
(
Configuration
tab >
Protocol Configuration
menu >
Endpoint
Settings
submenu >
Automatic Dialing
page item).
In this mode the gateway collects digits from the line, and sets up the
call towards the AlphaCom when a predefined number of digits are
collected and no more digits are received within a preset time (default 4
seconds), or when the ‘#’ key is dialed.
In the 'DTMF & Dialing' page (
Configuration
tab >
Protocol
Configuration
menu >
Protocol Definition
submenu >
DTMF &
Dialing
page item) select ‘Advanced Parameter List’ in order to view all
parameters, and set ‘Max Digits In Phone Num’ equal to the number of
digits used on the AlphaCom stations, normally 3 or 4.
The parameter ‘Inter Digit Timeout for Overlap Dialing’ specifies the
waiting time for more digits before setting up the call.
3.8.2 Automatic
Dialing
(Call to Switchboard)
When calling in, the call will automatically be connected to a predefined
intercom number.
;
Enter the intercom number in the ‘Destination Phone Number’ field in
the ‘Automatic Dialing’ page item. Set ‘Auto Dial Status’ to ‘Enable’.
(
Configuration
tab >
Protocol Configuration
menu >
Endpoint
Settings
submenu >
Automatic Dialing
page item).
