www.stenner.com
4
SAFETY INFORMATION
Warns about hazards that CAN cause death, serious
personal injury, or property damage if ignored.
ELECTRIC SHOCK HAZARD
This information contained in this manual is for reference only.
Prior to beginning any water treatment regimen, always consult with a water
treatment professional and adhere to the information contained in the chemical
manufacturer’s Material Safety Data Sheet.
Equipment is supplied with grounding power cord and attached
plug. To reduce risk of electrical shock, connect only to a properly grounded,
grounding type receptacle. Install only on a circuit protected by a Ground-Fault
Circuit-Interrupter (GFCI).
DO NOT
alter the power cord or plug end.
DO NOT
use receptacle adapters.
DO NOT
use PCM with a damaged or altered power cord or plug. Contact the factory
for repair.
HAZARDOUS VOLTAGE
DISCONNECT
power cord before removing cover for service.
Electrical service by
trained personnel only.
EXPLOSION HAZARD
This equipment
IS NOT
explosion proof.
DO NOT
install or operate in an
explosive environment.
RISK OF FIRE HAZARD
DO NOT
install or operate on any flammable surface.
Warns about hazards that WILL or CAN cause minor personal
injury or property damage if ignored.
Final settings on Stenner Metering Pumps or Pump Control
Modules must be determined through analytical testing of the treated water. The formulas
contained herein are intended solely as a guide to be used to assist in the proper
application of Stenner Pumps. The Stenner Pump Company makes no guarantee as to the
accuracy of the information contained herein. User assumes all risk and liability from use
of the information contained in this manual.
