84
MIGGY 161
COD. 6908300020
STEL s.r.l.
– Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
ÍNDICE GENERAL
1.0 SEGURIDAD
1.1
ADVERTENCIAS
1.2 INSTRUCCIONES PARA LA SEGURIDAD
2.0 ESPECIFICACIONES
2.1 CARACTERÍSTICAS GENERALES
2.2 CARACTERÍSTICAS ELÉCTRICAS
3.0 RECEPCIÓN
3.1 RECEPCIÓN DEL MATERIAL
3.2
RECLAMACIONES
4.0 CONEXIÓN
4.1 CONEXIÓN PRIMARIA Y ACOPLAMIENTO
4.2 PUESTA A TIERRA
5.0 PUESTA EN SERVICIO
5.1 MANDOS DEL PANEL FRONTAL
5.2 DESCRIPCIÓN DE LA PLACA DATOS
5.3 DISPOSICIÓN SOLDADURA POR ELECTRODOS (MMA)
5.4 DISPOSICIÓN SOLDADURA TIG
5.5 DISPOSICIÓN SOLDADURA MIG CON GAS
5.6 DISPOSICIÓN SOLDADURA MIG SIN GAS
5.7 DISPOSICIÓN SOLDADURA MIG ALUMINIO
6.0 FIGURAS
6.1 DISTANCIA POSTERIOR Y LATERAL A MANTENER DURANTE LA SOLDADURA
Y FUNCIONAMIENTO
6.2 SEÑALES DE SEGURIDAD
6.3 CICLO DE INTERMITENCIA Y SOBRETEMPERATURA
6.4 CURVAS DE TENSIÓN - CORRIENTE
7.0 INCONVENIENTES DE SOLDADURA Y FUNCIONAMIENTO
7.1 POSIBLES DEFECTOS DE SOLDADURA
7.2 POSIBLES INCONVENIENTES DE FUNCIONAMIENTO
8.0 LISTA DE COMPONENTES Y DIBUJOS DE DESPIECE
8.1 LISTA DE COMPONENTES
8.2 DIBUJO DE DESPIECE MIGGY 161
8.3 LISTA DE COMPONENTES
9.0 ESQUEMAS ELÉCTRICOS
9.1 ESQUEMA ELÉCTRICO GENERAL MIGGY
ÍNDICE
ESPAÑOL
25
MIGGY 161
COD. 6908300020
STEL s.r.l.
– Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
1.0– SAFETY
1.1 WARNINGS
ELECTRIC SHOCK CAN KILL
- Disconnect the machine from the power line before working on the generator.
- Do not work with deteriorated cable sheaths.
- Do not touch bare electrical parts.
- Ensure that all the panels covering the current generator are firmly secured in
place when the machine is connected to the mains.
- Insulate yourself from the work bench and from the floor (ground): use isolating
footwear and gloves.
- Keep gloves, footwear, clothes, the work area and this equipment clean and dry.
PRESSURISED CONTAINERS CAN EXPLODE IF WELDED.
When working with a current generator:
- do not weld pressurised containers.
- do not weld in environments containing explosive powders or vapours.
THE RADIATIONS GENERATED BY THE WELDING ARC CAN DAMAGE THE
EYES AND CAUSE BURNING OF THE SKIN.
- Provide suitable protection for the eyes and body.
- It is indispensable for contact lens wearers to protect themselves with
suitable lenses and masks.
NOISE CAN DAMAGE YOUR HEARING.
- Protect yourself suitably so as to avoid damage.
FUMES AND GASES CAN DAMAGE YOUR HEALTH.
- Keep your head out of the reach of fumes.
- Provide suitable ventilation of the work area.
- If the ventilation is not sufficient, use an exhaust fan that sucks up from the
bottom.
HEAT, SPLASHES OF MOLTEN METAL AND SPARKS CAN CAUSE FIRES.
- Do not weld near inflammable materials.
- Avoid taking any type of fuel with you such as cigarette lighters or matches.
- The welding arc can cause burns. Keep the tip of the electrode far from your body
and from other people’s.
It is forbidden for people with PACEMAKERS to use or come near the
machine.
SAFETY
ENGLISH
