55
STEL s.r.l.
– Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 0444 639525 (central.) – +39 0444 639682 (comm.)
FAX +39 0444 639641 – E-mail: stel @ stelgroup.it
http: www.stelgroup.it
MAX 503 & MAX 503 IP44
COD. 6914500030
5.3
5.3
5.3
5.3 ---- REMOTE CONTROL FUNCTIONS
REMOTE CONTROL FUNCTIONS
REMOTE CONTROL FUNCTIONS
REMOTE CONTROL FUNCTIONS
It is possible to use a device for the remote regulation of the various welding
parameters, connecting the CAD MAX 503 code 600007000L (optional), to the
special Weam 14-pole connector on the front panel (ref.14 page 51-52).
The generator will automatically prepare to receive the CAD regulations (the dot
on the right of the display will blink intermittently).
1)
Regulating the welding current
Use the encoder
A
(ref.6 ) to regulate the welding current which will be shown on
the display (ref.1). The current may be regulated from 4 to 500A.
2)
Regulating the Arc-Force function
When the Arc-Force button (ref.5) is pressed the respective led (ref. 4) blinks and
the blinking letters A.F. appear. By turning the regulating encoder
A
(ref.6) the
value can be varied from 0 to 500% of the set welding current. 3 seconds after the
end of regulation the display again shows the set welding current.
3
) Displaying the welding voltage
During welding the display (ref.1) automatically shows the real welding current: to
display the welding voltage press the button
V
(ref.7); the respective led (ref.8)
blinks intermittently. To exclude the voltage display press the button
V
(ref.7) .
MAX
MIN
F
1
2
3
4
5
6
7
8
TECHNICAL
DESCRIPTION
ENGLISH