8
3.3
Assessment of escape risk
A Steinsvik AS camera system will, under normal working conditions, not pose a risk of escape when it
is being used in a cage at a fish farm. The camera system does not consist of any parts that may, under
normal conditions, cause damage to the net, ropes or any other parts of the plastic or steel cage
construction.
Factors
1.
The camera’s suspension rope breaks: The camera is designed with no sharp edges, so it poses
no risk for holes or wear on the net/cage, even if it sinks to the bottom of the cage. However, if
the camera is not retrieved after a while, or if it under pressure from the lift-up or other
equipment, this can cause wear and tear on the net.
2. Suspension on the cage edge: The Orbit bracket for ring placed on the cage edge is made out
of strong aluminium and secured with stainless steel bolts and screws. These do not normally
come in contact with the net, but if they are not fastened properly or if they come lose, they may
pose a risk of wear and tear on the net (50-80 cm above water surface)
3. Winch strength: The winch has a built-in load protection and is set to lift 10 kg at sea. Any load
above this will deactivate the engine to avoid the rope/cable/winch controlled by the winch,
getting caught and wear a hole in the net when manoeuvring the winch.
Summary of Contents for Orbit-200
Page 34: ...34 Figure 22 Gamepad Figure 23 Gamepad backside ...
Page 46: ...46 ...
