31
-
The camera rope is supposed to tensions relieve the camera cable so that both the camera and
the camera cable is lifted by the rope (from the Multiwinch).
−
Lower the camera into the sea and wind the camera cable out in the cage.
−
Cut off some meters of the white winch rope and tie a strain relief to the camera cable. Attach
this to the handrail. This is to avoid unnecessary tension/strain to the contact/connection in the
PSU.
−
Connect the camera cable to the «Camera» connection in the PSU.
Figure 19 Camera Rope
Summary of Contents for Orbit-200
Page 34: ...34 Figure 22 Gamepad Figure 23 Gamepad backside ...
Page 46: ...46 ...
