Steinsvik Orbit-200, User Manual

Page: 17 / 46

17
4.10 Pulleyblock 18 mm
Table 10 Specifications - Pulleyblock
4.11 Camera cable
Steinsvik’s camera cable transfer all signals from the PSU to the camera. The cable can be delivered in
many different lengths, depending on what is required at the locations. It is delivered either as a blue
cable or a black cable where the black cable is enhanced with Kevlar on the outside, while the blue is
not enclosed in Kevlar.
To ensure the best possible utilisation of the system, the recommended length of the cable is diagonally
from the winch to the bottom of the cage on the opposite side.
4.12 Rope Orbit XXXM
Rope Orbit-XXXM can be delivered in many different lengths, all adjusted to the cage in which it is to be
used at. The rope is held tight by the counterweight located outside of the cage, on the oposite end of
where the winch is placed. The counterweight adjust the winchrope according to the movement of the
cage.
Standard lengths for cages are:
- 120M cage: 80M
- 160M cage: 100M
- 200M cage: 120M
When using steel cages, the standard delivery is the size of the cage x2 (ie. 24; cage = 50M rope).
The importance of correct installation is due to the winch experience. The user will have a very slow
experience trying to control the winch if the rope have not been installed correctly. The rope is to be
winded out so that all white and blue lines of the rope are parralell. This might take some time to do
properly, but it is worth spending some time on it in order to save much time at a later stage.
More details about mounting is explained in
chapter 5.6 .
Specifications
Material Nylon and stainless steel
Figure 12 Pulleyblock