30
STEINDORFF
®
3.3.9 Cross Hair& Reticle Control
On snap model, you can press the up key of the menu
button (Fig.22
①
) to select self-definition graphics,
including the crossing line and reticle with crossing line. The graphics is display on the LCD screen to carrying
out simple locating and measurement
Press the up key one time, the cross hair will be showed on the LCD screen (Fig.23).Then press the down key
of the menu
button (Fig.22.
②
),there are 5colors available(green, blue, black, white and red
）
.It used to
select among colors of the self-definition graphics, facilitating the clear indication under different color
material
s
If you press up key (Fig.22
①
) two time, the reticle will be showed
on the LCD screen (Fig.24)
Numerical value of graduation, Please refer to the below:
A graduation equals 0.05mm under 4X objective
A graduation equals 0.02mm under 10X objective
A graduation equals 0.005mm under 40X objective
A graduation equals 0.002mm under 100X
objective
Then, press the up key (Fig.22
①
) once again on the Fig.24, the cross hair will disappear.
Fig.22
Fig.24
Fig.23
