20
STEINDORFF
®
Adjustment & Operation
3
．
3.3 Screen display data
Press
button to select snap, video or playback.
1.
Fig.17-01. Once the power on, the model is snap (photo) model. Press
button
，
the system will store
the photo automatically.
2.
Fig.17-02. Press the
button after power on, the model is video model. Press
button
,
the
system will start to take video recording
,
press
button again, video recording is over. When the SD
card is full, the system will show “SD full”.
3.
Fig.17-03. Press the
button 2times after power on, the model is playback model.
Fig17-01
Shown on the upper right corner is the Nos of photos that can be taken or the video recording time
（
“0000”
means in the current setup mode, it still can shoot 0000pcs photos
）
. (“00
：
00
：
00” means in current
setup mode it still can record 00min 00sec
）
.
On the upper left corner,
indicates photo mode
，
indicates video mode.
Pic17-01, Shown on the top middle “5M” is the resolution of photos taken in Pixels.
（
“5M”indicating the
pixels for photo taken at the present setup mode as 2560x1920. (“VGA” indicating the pixels for video
taken at the present setup mode as 640X480.
“SD” show on the lower left corner means that SD card inserted is inserted in the LCD microscope head.
“CARD FULL” indicates that the memory of the SD card is full.
Fig.17-02
Fig17-03
