Steinberg UR-RT2, Operation Manual

Page: 20 / 51

Software
UR-RT4 / UR-RT2 Operation Manual 20
4
KNEE
Selects the knee type of the compressor.
5
SIDE CHAIN Q
Adjusts the band width of the side chain filter.
Range: 0.50 - 16.00
6
SIDE CHAIN F
Adjusts the center frequency of the side chain filter.
Range: 20.0 Hz - 20.0 kHz
7
SIDE CHAIN G
Adjusts the gain of the side chain filter.
Range: -18.0 dB − +18.0 dB
8
COMPRESSOR On/Off
Turns the compressor on (lit) and off (unlit).
9
Compressor Curve
This graph indicates the approximate compressor
response.
The vertical axis indicates the output signal level, and the
horizontal axis indicates the input signal level.
)
Gain Reduction Meter
Indicates the gain reduction.
!
DRIVE
Adjusts the degree to which the compressor is applied.
The higher the value, the greater the effect.
Range: 0.00 − 10.00
Equalizer
1 Equalizer Curve
This graph indicates the characteristics of the 3-band
equalizer. The vertical axis indicates the gain, and the
horizontal axis indicates the frequency. You can adjust
LOW, MID, and HIGH by dragging each handle in the
graph.
2
LOW F
Adjusts the center frequency of the low band.
Range: 20.0 Hz − 1.00 kHz
3
LOW G
Adjusts the gain of the low band.
Range: -18.0 dB − +18.0 dB
4
MID Q
Adjusts the band width of the middle band.
Range: 0.50 − 16.00
5
MID F
Adjusts the center frequency of the middle band.
Range: 20.0 Hz − 20.0 kHz
6
MID G
Adjusts the gain of the middle band.
Range: -18.0 dB − +18.0 dB
7
HIGH F
Adjusts the center frequency of the high band.
Range: 500.0 Hz − 20.0 kHz
8
HIGH G
Adjusts the gain of the high band.
Range: -18.0 dB − +18.0 dB
9
EQUALIZER On/Off
Turns the equalizer on (lit) and off (unlit).
Options Description
SOFT Produces the most gradual change.
MEDIUM Results in a setting midway between SOFT
and HARD.
HARD Produces the sharpest change.
1
9
8
7 2
3
4
6
5