Software
UR-RT4 / UR-RT2 Operation Manual
16
Dedicated Windows for Cubase
Series
These are the windows for configuring the device settings
from Cubase series software. The dedicated windows for
Cubase series allow you to configure the parameters
which are configured by dspMixFx UR-RT. Two types of
windows are available: Input Settings and Hardware
Setup.
Screenshot
How to Open the Window
Input Settings Window
From the Cubase series menu, [Studio]
[MixConsole]
[HARDWARE]
Hardware Setup Window
From the Cubase series menu, [Studio]
[Audio
Hardware Setup]
Input Settings Window
This window is for configuring the input settings of the
device. The signal flow is from top to bottom. The settings
on this window (except for the +48V indicator) are saved
to the Cubase project file.
Input setting window ([HARDWARE]) is shown according
to the settings for Stereo bus and Mono bus at the UR-RT
device port.
1
+48V
Indicates the phantom power on/off status.
2
Phase
Turns on (lit) and off (unlit) the phase inversion of the
signal.
3
High Pass Filter
Turns on (lit) and off (unlit) the high pass filter (not
available on [LINE INPUT 5/6] {[LINE INPUT 3/4]}). To
select the cutoff frequency of the high pass filter, use the
“Settings Window” (
) in the section “Dedicated
Windows for Cubase Series.
4
Effect Edit
Opens the selected effect setup window.
5
Effect Type
Selects the effect type.
Options:
ChStrp, Clean, Crnch, Lead, Drive
NOTE
The maximum number of Channel Strip and Guitar Amp Classics
iterations which can be used simultaneously has restrictions. Refer
to the “Limitations on the use of effects” (
).
6
DRIVE/Output Level
When Channel Strip is selected, this adjusts the degree to
which the compressor is applied. The higher the value,
the greater the effect.
Range:
0.00 − 10.00
When Guitar Amp Classics is selected, this adjusts the
output level.
Range:
0.00 − 1.00
7
MORPH
Adjusts the Channel Strip Sweet Spot Data. (Refer to the
“MORPH” in the section “Channel Strip” on
).
When Guitar Amp Classics is selected, MORPH is not
displayed.
1
2
@
3
4
6
7
)
!
#
9
8
5
Summary of Contents for UR-RT2
Page 1: ...USB AUDIO INTERFACE UR RT4 UR RT2 Operation Manual Operation Manual EN...
Page 40: ...Appendix UR RT4 UR RT2 Operation Manual 40 UR RT4 176 4 192 kHz TRANSFORMER TRANSFORMER...
Page 43: ...Appendix UR RT4 UR RT2 Operation Manual 43 UR RT2 44 1 48 88 2 96 kHz TRANSFORMER TRANSFORMER...
Page 44: ...Appendix UR RT4 UR RT2 Operation Manual 44 UR RT2 176 4 192 kHz TRANSFORMER TRANSFORMER...
