Steinberg UR-RT2, Operation Manual

Page: 15 / 51

Software
UR-RT4 / UR-RT2 Operation Manual 15
5 KNOB MOUSE CONTROL
Selects the method of operating the knobs on dspMixFx
UR-RT.
6 SLIDER MOUSE CONTROL
Selects the method of operating the sliders and faders on
dspMixFx UR-RT.
Information Window
This window indicates information about dspMixFx UR-RT
and the device.
1 Version Information
Indicates the version of the firmware and software.
What is Loopback?
Loopback is a convenient function for broadcasting over
the Internet. It mixes the input audio signals (such as
microphone and guitar) with the audio signals playing
back in the software in the computer into two channels in
the UR-RT, and sends them back to the computer. Refer to
the section “Signal Flow” (
page 37 ).
If the Loopback function is on while you are monitoring
input signals from the UR-RT via DAW software, it will
cause loud noise. This is because an infinite loop of the
audio signal is generated between the UR-RT and the
DAW software. When using the loopback function, turn off
the monitor functions on your DAW software.
Options Description
Circular Drag in a circular motion to increase and
decrease the parameter. Drag on a dial
clockwise to increase, and counterclockwise
to decrease. If you click any point on the
knob, the parameter will jump there instantly.
Linear Drag in a linear motion to increase and
decrease the parameter. Drag upward or
rightward to increase, and downward or
leftward to decrease. Even if you click any
point on the knob, the parameter will not
jump there.
Options Description
Jump Click any point on the slider and fader to
increase and decrease the parameter. If you
click any point on the slider and fader, the
parameter will jump there instantly.
Touch Drag the handle of the slider and fader to
increase and decrease the parameter. Even
if you click any point on the slider and fader,
the parameter will not jump there.
UR-RT
BGM
Deliver
dspMixFx (for iOS devices)
From your iOS devices, you can conveniently control built-
in DSP mixer functions and DSP effects by using
dspMixFx for iOS devices. For details on this app, see the
Steinberg web site below.
http://www.steinberg.net/
1