Using with an iOS device
UR-RT4 / UR-RT2 Operation Manual
32
Recording/Playback
This section covers basic instructions for operating with
Cubasis (an iPad app sold by Apple).
NOTE
• iOS app may not be supported in your area. Please check
with your Yamaha dealer.
• For the latest Cubasis information, see the Steinberg web
site below.
http://www.steinberg.net/
1.
Open Cubasis.
2.
Tap the [MEDIA] tab on the upper left of the
screen.
[Create New Project] is shown in the bottom of the
screen.
3.
Tap the [Create New Project].
4.
Enter a project name and tap [OK] in the [New
project] window.
5.
Tap [+AUDIO] to add an AUDIO track.
6.
Tap
on the far left of your screen to show the
track menu, with [Audio input] at the top.
7.
Tap
to show the details window and set the
input bus for the track by tapping a number.
8.
Tap
to turn monitoring on (lit).
9.
Adjust the input signal level of the microphone
with the [GAIN] knob on the device.
10.
While singing into the microphone, adjust the
output signal level of the headphones with the
[PHONES] knob on the device.
11.
Tap [
I
] to start the recording.
12.
Tap [>] to stop the recording.
Setting optimum recording levels
Adjust the gain knobs so that the [PEAK] indicator flashes
briefly at the loudest input volume.
Summary of Contents for UR-RT2
Page 1: ...USB AUDIO INTERFACE UR RT4 UR RT2 Operation Manual Operation Manual EN...
Page 40: ...Appendix UR RT4 UR RT2 Operation Manual 40 UR RT4 176 4 192 kHz TRANSFORMER TRANSFORMER...
Page 43: ...Appendix UR RT4 UR RT2 Operation Manual 43 UR RT2 44 1 48 88 2 96 kHz TRANSFORMER TRANSFORMER...
Page 44: ...Appendix UR RT4 UR RT2 Operation Manual 44 UR RT2 176 4 192 kHz TRANSFORMER TRANSFORMER...
