Steinberg Nuendo Time Base, Operation Manual

Page: 78 / 92

TIME BASE
7 – 78 Connections
Connections on the rear panel
Rear panel connectors (detail)
VITC-Reader/Generator/Inserter
Video in / out (BNC) or S-VHS in / out
Only the BNC or S-VHS connections can be active at any point. Switch-
ing between them is done on Display page 2 (see page 48).
These connections are used to read VITC, burn the visible Time Code
into the picture and to insert VITC into the video signal (which lets you
create VITC encoded video copies).
Video Sync In/Out
These high-impedance thru-put sockets (BNC) are provided for the
Video Sync signal (House Sync, Blackburst).
❐
Warning: The sync chain must be 75Ω terminated at the end of the cable), if
Time Base is the only or last sync device in the chain. Use a 75Ω terminator!
LTC – Longitudinal Time Code
In – 1/4” TRS Jack/6.3mm stereo socket, balanced input.
Out – 1/4” TRS Jack/6.3mm stereo socket, balanced input.
Rear panel connectors (detail)