Steinberg Nuendo Time Base, Operation Manual, Page: 66 / 92

TIME BASE
6 – 66 Service and Machine Pages
• Auto Response ON may only be used with specially adapted Sequencers/
HD Recorders.
Parameter Explanation
TCLEV:
Time Code Output Level: -10dB, -7dB, -4dB, -1dB, +2dB, +5dB, +8dB
Parameter Explanation
SYSEX=OFF All SYSEX data, that can alter Time Base parameters, is ignored.
Parameter Explanation
AR=OFF
Auto Response OFF.
AR=ON Auto Response ON – Enables precise status reports to the connected
Nuendo system, e.g. the track arm status of the connected 9-pin Machine.
When you use Nuendo version 2.1 or higher, the default setting for this pa-
rameter is ON.
PRE:25fINT NUENDO LOAD SAVE TCLV:+2dB
SYSEX=OFF AR=ON RED:C-102 9-PIN SP2
PRE:25fINT NUENDO LOAD SAVE TCLV:+2dB
SYSEX=OFF AR=ON RED:C-102 9-PIN SP2
PRE:25fINT NUENDO LOAD SAVE TCLV:+2dB
SYSEX=OFF
AR=ON RED:C-102 9-PIN SP2