Steinberg Nuendo Time Base, Operation Manual, Page: 26 / 92

TIME BASE
4 – 26 Typical Setup Examples
Time Base settings: TCIN=MTC , CL: MTC-HOLD
Connections:
If you should find yourself in such a situation, you can sometimes chose
the following:
If your MTC source is a stand-alone Hard Disk Recorder with a digital in-
put which can be externally synchronized, you should switch the Word
Clock source of the recorder to “digital in”, having connected it to a Word
Clock output on the Time Base. If you now use the MTC produced by the
recorder as a positional reference, your entire system will follow the exter-
nal device.
Time Base setting:
CL:INTERNAL
(V-SYNC)/
TCIN=MTC
Connections: stand-alone« HD-Recorder and Nuendo
As an alternative, the MTC produced by Time Base can be used as a po-
sition reference by the external device. In this case the external device fol-
lows the system.
ext. MTC-In
USB port
VST System Link
Stand-alone
HD Recorder
Audiosignale
USB port
MTC
Word Clock
VST System Link