Steinberg Nuendo Time Base, Operation Manual

Page: 57 / 92

TIME BASE
Reference 5 – 57
Selecting tracks and switching Track Selection pages – 9-Pin-
Machine A – Display page P.A
If you use Nuendo version 2.1 or higher the tracks of the 9-pin Machine A
can be armed from within the software. In such an environment these
Display pages will therefore mainly be used for system setup and test.
Analog Tracks
Display and selection of the 9-pin Machine A tracks that are activated for
recording. Time Base automatically detects a connected 9-pin Machine
(Autosetup) and displays it correspondingly on the Display page P.A. The
Display page P.A in the illustration above shows the Track remote of a
BVW-40 (-75).
❐
To be able to switch tracks directly on or via Time Base, you must activate
the REC function (see page 71).
Parameter Explanation
INS
Insert – The Machine is in Insert Mode (tally).
ASM Assemble – Machine is in Assemble Mode (tally).
V Video track – If activated, an additional r > rV appears.
TC Time Code track: – If activated, an additional r > rTC appears.
AUX1 (2) Aux tracks (analog audio) – If activated, an additional r > rAUX1 appears.
V INS
AUX1 AUX2 TC P.A