Two way coded car alarm system
PIN code
Disarming with PIN code
In arming mode with PIN code, press button, the siren will
chirp three times, turn signals will flash once, key in the correct
PIN code, the siren will chirp twice and the system will be
disarmed and the doors will be unlocked.
If the PIN code entered is incorrect, the siren will chirp three
times, turn signals will flash once. If you enter the wrong PIN
code five times, the alarm will be triggered and chirping for
30 seconds. You can stop the alarm chirping by pressing
button after 4 seconds, however, you can key in a new PIN
code 1 minute later.
If the PIN code is wrong for another 5 times you can key in a
PIN code 10 minutes later
.
Turning off PIN code mode
Turn ACC ON, press footbrake, press button and hold for
2 seconds, the siren will "Du" once with turn signals flash once.
The PIN code mode is turned OFF.
Resuming PIN code
When PIN code mode is OFF, turn ACC ON, press footbrake,
press button and hold for 2 seconds, the siren will "Du"
twice with turn signals flash twice. The PIN code mode is
turned ON and the PIN code is resumed (the same as before)
Forget the PIN code
If you forget your PIN code, please reprogram the transmitters
or contact the dealer.
Functions
1. Alarm arming & locking the doors
When armed, the system will respond if unauthorized entry
is attempted. When an unauthorized entry occurs, turn signals
will flash and the siren will chirp.
Press button once, the doors will be locked with the LED
indicator flashing and turn signals flash once, the siren chirps
“Bee” once, then the vehicle is armed in alarm arming mode
with shock sensor (and tilt sensor if equipped) activated. The
transmitter will beep “Bee” once with
icon and
icon
showing on the screen. The icon flashes twice and backlight
will turn on.
Press button once again, the LED indicator will flash with
turn signals flash once, the siren chips “Bee” once, then the
vehicle is armed with shock sensor, tilt sensor and microwave
sensor (if equipped). The transmitter will respond with“Do-Re-
Mi” with icon and icon showing on the screen. The icon
flashes twice and backlight will turn on (this function is only
available for models with microwave sensor).
2. Mute arming & locking the doors
When mute armed, this system will respond if unauthorized
entry is attempted. When the unauthorized entry occurs, turn
signals will flash and the siren will not chirp.
Press button once, the doors will be locked with the LED
indicator flashing and turn signals flash once, the siren will
not chirp, then the vehicle is armed in mute mode with shock
sensor (and tilt sensor if equipped) activated. The transmitter
will beep once with icon and icon showing on the screen.
The icon flashes twice and backlight will turn on.
9
10
