Two way coded car alarm system
(2). Clock alarm setting: When “ALARM” icon flashes on the
LCD screen, press button to enter and set the clock alarm
ON or OFF.
When “ON” flashes on the LCD screen, press button once
to enter the alarm time setting mode, set the alarm time by
button. When the time is set, press button to save and
enter the “MODE” setting mode.
(3). Mode setting: When “MODE” flashes, press
button to
enter and choose mode1, 2 and 3 of the transmitter.
For mode1, the transmitter will only beep without vibrating
For mode2, the transmitter will only vibrate without beeping
and with icon shown on the screen.
For mode3, the transmitter will vibrate and beep with icon
shown on the screen.
(4). Auto-arm setting: When “AUTO-ARM” flashes, press
button to enter and choose Auto-arm function ON or OFF.
(5). Exit: Press + button together for 1 second to save the
setting and exit the setting mode.
30. Disable the former transmitters
Press and hold the learning button in ECU for 10 seconds,
the LED indicator will turn on for 10 seconds and the siren will
chirp once to indicate both former transmitters are disabled.
31. Programming new transmitters
Press footbrake, turn the ignition key from OFF to ON 8 times
continuously and keep the key at “ON” position finally, the LED
indicator of alarm system will turn on, press button once, the
LED indicator will flash to indicate the successful program of
this transmitter; press button of another transmitter once,
the LED indicator will flash to indicate the successful program
of this transmitter. Only two transmitters are functional.
32. Additional channel
The additional channel (-) is designed for protecting other
devices (such as DVD, TFT monitor, car audio etc.).
Technical parameters
Frequency range: 433.92MHz
ECU:
Voltage: 12 V ± 3V
Current:
*
10mA (shock sensor only)
SPL: 110~125dB
Transmitter:
Voltage: 3.2~4.2V
Current:
*
45
*
A
21
22
