Two way coded car alarm system
Brief look at each device
Arming button
Press button once to arm in alarm arming mode with
shock sensor/tilt sensor and lock the doors (for products with
tilt sensor).
Press button the second time to arm with microwave
sensor/shock sensor/tilt sensor. Microwave sensor can be
switched on or off by pressing button (for products with
microwave sensor).
Press button for 2 seconds to locate the vehicle.
Press button to pause alarm while the system is alarming
Disarming/Power button
Press button once to disarm the system and unlock the
doors, then press button twice continuously to disarm the
system completely.
Press button to unlock the doors while engine is running.
Press button for 3 seconds to turn on the transmitter, press
button for 5 seconds to turn off the transmitter.
Important notice
Please install the system by an authorized engineer.
Keep the product and the transmitters away from water.
It is highly recommended to read this manual carefully
before using this unit.
This product will help you reduce the possibility of losing
the car by discouraging theft. It is not a substitute for owner’s
vigilance. Please take the valuables with you when leaving
the car.
When the transmitter operating distance is shorter or its
indicator light turns dark, please recharge the transmitter
battery ASAP.
When the transmitter is off, please switch it on by pressing
and holding button for 3 seconds.
LCD screen
Antenna
Alarm arming
Charging socket
Mute arming
Trunk release
Disarming
Power ON/OFF
Digital number
for PIN
3
4
