Two way coded car alarm system
In 35 seconds, if the door is still not closed completely, the
siren will chirp with turn signals flashing until the system is
disarmed. The
icon
and
icon flash on the transmitter’s
LCD screen, the transmitter beeps for about 30 seconds with
8 vibrations. The system will repeat alarm for 4 minutes if
the door/hood is not closed or the system is not disarmed.
Prees
button to disarm and stop the alarm.
23. Open trunk reminding
When the system is armed and the trunk is not closed
completely, 8 seconds later, the siren will chirp 3 times and
turn signals will flash 3 times. The transmitter beeps “Bee-
Bee” 8 times with 8 vibrations, the
icon flashes on the
LCD screen. Please disarm and close the trunk, then arm it.
In 15 seconds, if the trunk is still not closed completely, the
siren will chirp with turn signals flashing until the system is
disarmed. The
icon and
icon flash on the transmitter’s
LCD screen for about 30 seconds, the transmitter beeps for
30 seconds with 8 vibrations. The system will repeat alarm
for 4 minutes if the trunk is not closed or the system is
not disarmed.
24. Comfort closure (optional)
Window closer function is only for vehicle with convenient
system (turn key to lock position and hold until the
roof/windows are closed).
Please switch SW2 to "ON" position to activate this function.
The windows and roofs will be closed when arming the system.
For those vehicles without this function, the SW2 switch must
be at "OFF" position. Otherwise, the central locking system
will be damaged (factory setting: SW2 switch on "OFF" position).
25. Antenna range indication
Antenna range is indicated by bar on the LCD screen, the
more the bar, the stronger the signal. When the transmitter
cannot receive the signal from the system, the signal bar will
disappear in 3 minutes.
The alarm signal will be sent to both transmitters when the
alarm system is triggered. When a transmitter sends signal
to the system, the system will send the feedback signal to
the operating transmitter only.
26. Status preserving
If the power is cut off, the system will resume all functions
in 5 seconds when the power is on again.
27. Warning for triggered system
If the system has been triggered in armed status, when you
disarm it and open the door, you will find:
1). The siren will chirp twice when shock sensor, tilt sensor,
or microwave sensor have been triggered.
2). The siren will chirp 4 times when door/trunk has been
opened, or ACC has been turned to ON, or footbrake has
been pressed.
When you turn ACC ON, the LED indicator will stop flashing.
28. Dome light delay
This function is especially designed for the vehicle with dome
light function. The system will enter into the arm mode after
the dome light turn off (45 seconds maximum).
29
.
Transmitter setting
Press + button together for 1 second, the transmitter beeps
once to enter the setting mode, the “set” icon will show on the
display. Then press button to choose “TIME/minute”
*
“TIME/hour”
*
“ALARM/ON” or “OFF”
*
“ALARM/minute”
*
“ALARM/hour”
*
“MODE”
*
“AUTO-ARM”
*
“EXIT”.
Press button to select the setting mode, after the mode is
selected, press button for adjustment. When “EXIT” flash,
press + button together for 1 second to save and exit the
setting mode. Press button only to exit the setting mode
without saving the changes.
(1). Time setting: When “TIME” icon flashes on the LCD
screen, press button to adjust the minutes, save and enter
hours setting by pressing button, then press button to
adjust hours.
19
20
