Two way coded car alarm system
6. Impacting shock sensor
The system is a 2-stage warning system:
In alarm arming mode, the first shock impact will trigger the
1-stage warning of the system, the siren will chirp 3 times
with turn signals flashing, and the engine will be immobilized.
The transmitter will “Bee-Bee” 5 times with 2 vibrations, the
icon and the
icon will be flashing on the transmitter’s LCD
screen. This procedure will repeat once.
A second impact within 15 seconds will trigger the 2-stage
warning of the system. The siren will chirp for about 30 seconds
with turn signals flashing, and the engine will be immobilized.
The transmitter will beep 30 seconds with 8 vibrations, the
icon and the icon will be flashing on the transmitter’s LCD
screen. The system will return to its former arming status after
alarm.
In mute arming mode, the shock impact will trigger the system,
the siren will not chirp, turn signals will flash, the transmitter
has the same actions as that in alarm arming mode.
7. Impacting tilt sensor (additional)
When a tilt sensor is equipped, any movement of the car will
trigger the alarm system.
In alarm arming mode, when slight tilt of the car detected,
the siren will chirp 5 times with turn signals flashing. The
transmitter will beep “Bee” 5 times and then vibrates once to
remind the owner, the
icon and the icon will flash on
the transmitter’s LCD screen, the engine will be immobilized.
This action will repeat once.
When big tilt of the car detected, the siren will chirp for 30
seconds with turn signals flashing, the engine will be
immobilized. The transmitter beeps “Bee-Bee-Bee” for about
30 seconds with 8 vibrations to remind the owner, the
13
14
icon and the icon will flash on the transmitter’s LCD
screen, the backlight will turn on, the engine will be immobilized,
the system will return to its former arming status after alarm.
In mute arming mode, the movement of the car will trigger the
system, the siren will not chirp, turn signals will flash, the
transmitter’s warnings are the same as that in alarm arming
mode.
8. Sensitivity adjustment of tilt sensor:
There are 3 sensitivity levels of tilt sensor. To press button
in tilt sensor can switch among the sensor’s 3 sensitivity levels:
Low: the LED indicator will flash once
Medium: the LED indicator will flash twice
High: the LED indicator will flash 3 times
Note:
This icon will flash quickly from left to right on the LCD
screen of the transmitter when tilt sensor is triggered.
9. Impacting microwave sensor (additional)
When a microwave sensor is equipped, any movement around
the car will trigger the alarm system. The system is a 3-stages
warning system:
Press button or button twice in 5 seconds to activate
microwave sensor, press button or button again to
disengage microwave sensor.
In alarm arming mode, when the microwave
sensor detects continuous movements for
16 seconds around the car, the 1-stage
warning system will be triggered, the engine
will be immobilized. The transmitter beeps
“Bee” 5 times and vibrates twice to remind
the owner, the icon and the clock position
