Page 31 of 38
939504792 Rev D
1
2
Final Assembly
1.
A tie strap must be attached 1.0" in from the
front edge of the worksurface whenever an
inset shared leg is used. Tie straps do not
utilize pilot holes.
2.
Since all caps and spanners require a front
shared leg, the stealth plate must be shifted
back 6.25" from its normal position. All caps
and spanners have pilot holes to help find
this new location, but the adjacent
worksurfaces do not.
1.0"
13.6"
(front)
(rear)
6.25"
NEW
POSITION
ORIGINAL
POSITION
Notch
