Page 26 of 38
939504792 Rev D
Tether Supported Worksurface
Application Rules
Spanners
Straight leg can be placed halfway back to support two worksurfaces
spanning more than 90"W or less when attached to a spanner worksurface.
This also applies to extened corners.
Straight leg can be placed halfway back to support a span that
include extended corner worksurfaces when the span is 126"W or less.
Straight leg must be placed at the front of the worksurface to support two
corner worksurfaces spanning more than 90"W when attached to a
spanner worksurface. This also applies to extended corners.
Extended Corners
Straight leg must be placed at the front of the worksurface to
support a spans that include extended corner worksurfaces
when the span is greater than 126"W.
Straight leg can be placed halfway back to support spans that
include two extended corner worksurfaces when the span is
132"W or less.
Straight leg must be placed at the front of the worksurface to
support spans that include two extended corner worksurfaces
when the span is greater than 132"W.
More than 126"
71"W
60"W
Straight leg in
front position
132" or less
65"W
65"W
Straight leg
halfway back
126" or less
71"W
48"W
Straight leg in
halfway position
More than 132"
71"W
71"W
Straight leg in
front position
90" or less
42"W
47"W
Straight leg in
halfway back
More than 90"
60"W
47"W
Straight leg in
front position
=
=
=
Wall
Tether Bracket
Leg
