P
P
Page 30 of 38
939504792 Rev D
2
Attaching Straight Legs (cont.)
2.
Shared Legs
a) Shared legs are attached from below
while a partner supports the front of the
worksurface, and tether brackets support
the rear of the worksurface.
b) Note that the pilot holes in the work-
surfaces are slightly eccentric (off center)
with the holes in the mounting plate. This
helps pull the worksurfaces together.
b)
a)
3.0"
NOTCH
(front)
(rear)
FRONT SHARED POSITION
3.0" from front edge
13.6"
NOTCH
(front)
(rear)
INSET SHARED POSITION
13.6" from front edge
PILOT
HOLE
CLEARANCE
HOLE
P
