Page 16 of 38
939504792 Rev D
1
2
3
4
STRAIGHT LEG
MOUNTING PLATE
PRESS
NOTE:
Height-adjustment buttons
and notches face inward
as shown, away from the user.
PILOT
HOLE
P
P
Mobile Spanner Assembly
1.
On a non-abrasive surface (such as a shipping
blanket or carpeting) free of screws, tools
and other debris that may damage it, flip the
worksurface over so its pilot holes are visible.
2.
On each straight leg, identify the two (2) holes
that will align with the pilot holes in the worksurface.
3.
Align each straight leg with the pilot holes, such that
the notch in the plate faces the interior of the work-
surface. (Height adjustment buttons should always
face away from the user.) ATTACH EACH LEG WITH
TEN (10) "A" SCREWS.
4.
Before flipping the worksurface back over, adjust the
height of all four (4) legs to the desired height by
pressing button and sliding leg up or down.
