Page 25 of 38
939504792 Rev D
Tether Supported Worksurface
Application Rules
Worksurface Span
Corners
Tether bracket and straight leg are needed to support the center of
a 72"W straight worksurface when the worksurface is loaded over
125 pounds and has 72" of unsupported kneespace.
Kneespace is the span of worksurface between supports. When a
pedestal is used for support, it reduces the unsupported kneespace
span.
Straight leg can be placed halfway back to support a span attached
to a conference link or conference wing worksurface when the span
is 72"W or less.
Straight leg can be placed at the front of the worksurface to
support any span of worksurface that is greater than 84"W.
Conference Links and wings
Straight leg must be placed at the front of the worksurface to
support a span attached to a conference link or conference wing
worksurface when the span is more than 72"W.
Straight leg can be placed halfway back to support spans of work-
surfaces attached to corners when the span is 84"W or less.
Straight leg must be placed at the front of the worksurface to
support any span of worksurface that is greater then 84"W.
Corners
72"
More than 84"
Straight leg in
front position
60"W
60"W
72"
72"
57"
72" or less
Straight leg
halfway back
36"W
36"W
More that 72"
Straight leg in
front position
42"W
42"W
84" or less
Straight leg in
halfway back
42"W
42"W
More than 84"
Straight leg
in front position
60"W
60"W
Straight leg can be placed halfway back to support spans between
corner worksurfaces up to 84"W.
Straight leg must be placed at the front of the worksurface to support spans
between corner worksurfaces when the span is greater than 84"W.
84" or less
Straight leg in
halfway back
42"W
42"W
More than 84"
60"W
60"W
=
=
=
Wall
Tether Bracket
Leg
