21
CHECK FOR FILAMENT LEVELS
If you are using a Windows 7 operating system you will see the
button. This will launch the
Helpful Printer Driver®, allowing you to see real-time filament levels, unique offers and the opportunity to buy
replacement filament as below:
If you are using any other operating system than Windows 7 you will see this button on the top left-hand
corner of the screen. This will allow you to check your filament levels, as well as providing additional information
as below:
This panel will appear on both the ModelSmart Pro 280
and 200 but will only include the applicable information;
i.e. only one extruder for the 200.
RETURN TO HOME SCREEN
The button will return you to the Home Screen, closing the Scene you are in. If you wish to return to the
Scene after clicking this button, simply click the ‘X’ close button on the Home Screen and it will return you to the
exact point you were prior to clicking this button, including any editing changes you had made.
Left Extruder (Bottom Cartridge)
Cartridge Brand: ST3Di
Filament Material: PLA
Filament Colour: BLUE
Remaining Filament: 50% (375g)
Cartridge Brand: ST3Di
Filament Material: PLA
Filament Colour: RED
Remaining Filament: 50% (375g)
Right Extruder (Top Cartridge)
