Audio Input Settings
Remote Activation
• The Input setting is used to adjust the Audio
inputs. This is not necessary unless you are using
multiple inputs and want to balance the volume.
The default setting which is a middle setting for
each input is a good starting point. Weak signals
can be boosted here and very strong signals can
be reduced. Boosting normal signals will only
result in distortion and possibility of shutting
down the amplifier.
• Bluetooth is also used to adjust the Music App
levels.
• When a memory cycle is started with your
mySteamist app or another remote device, the
home screen will show a 15:00 minute count-
down timer and your Personal Setting icon will
flash.
• The Personal Setting icon needs to be pressed
before the time expires to confirm the cycle.
When confirmed, the cycle continues and the
normal operating screen is displayed.
• When the ShowerSense is started remotely, the
water will only run long enough to get the water
up to temperature and then it will pause. The
timer will continue to count down while the
water is paused.
Page 10
Pub. No. 311-A
06/17
Standby Screen
• When the control is off, you have an option to
either see the Clock standby screen or a black out
standby screen.
• When the control is off and is in the Clock view
screen, press the Power icon to enter the black
out standby screen. To turn the control on, touch
the screen and you will see a promt asking if you
would like to turn the control on or not.
