Firmware Update and Language Settings
Clock Settings
Important: The TSC-550 will only display the appropriate icons for the features connected to the system. If your
control is not showing all the connected devices, press the Power icon to toggle the display off then touch the
display and press yes to turn on. This will force the control to scan for all connected devices.
The TSC-550 allows you to program two steam memory cycles, two shower memory cycles, plus a Direct Access
audio and light setting. If your control is displaying all features, including options not installed, go to display
settings and turn the Demo mode off.
• When a SYSTEM UPDATE exclamation symbol is
displayed, it indicates that a new Firmware
Update is available. Press the SYSTEM UPDATE
icon and the new software will begin installation.
The display screen will show “System updating”,
do not press any icons when update occurs.
Control MUST be connected to Wi-Fi to update
Firmware.
• The language may be adjusted by pressing the
Language icon. From the language screen select
• Press the CLOCK icon to adjust the clock
settings.
• The clock may be turned off if it is not desired,
with the ON/OFF icon.
• The time format may also be changed.
• Press the TIME ZONE icon to set the clock to
automatically update over Wi-Fi.
• If you turn Automatic date & time off, you may
set the clock to any time you like.
• If you turn Automatic date and time on, you
need to select the appropiate time zone. This will
keep your clock accurate to that time zone.
• Use the Triangle icon to return to the previos
screen.
• Press the Return icon to return to the settings
screen.
Page 4
Pub. No. 311-A
06/17
STEAMIST-_:_ _:_ _
UPDATE
SYSTEM
!
