Pub 300 rev A
01/2011
Primary Settings
Clock Settings...
• When the control is powered up, you will see the Stand-by Screen, if the clock is
turned on.
• Turn on the control by pressing power button.
• Press the TOOLS button.
• Press the CLOCK button.
• Press the up arrow
button to change the time.
The Clock by default is in the ON mode. To disable the clock function press the
CLOCK button to switch it to OFF. CLOCK OFF mode will also turn off the stanby
screen.
• Press the power button to exit or the return button
to go back to the
prior screen.
Selecting InstaMist
™
ON or OFF...
• Turn on the control by pressing power button then press the TOOLS button.
• InstaMist
™
by default is OFF. To enable the InstaMist
™
function press the
INSTAMIST button to switch it ON.
The INSTAMIST ON feature keeps the water hot and ready for your next
steambath. It uses an average of 60 watts per hour, so you may want to turn
INSTAMIST OFF during long periods when the steambath will not be used.
• Press the power button to exit or the return button
to go back to the
prior screen.
Memory Settings
The Total Sense
™
TSC-450 Touch Control allows you to program two memory settings, plus a direct access
audio and light setting.
Steam Settings...
• Press the desired personal setting button, MEMORY 1 or MEMORY 2.
• The steambath actual temperature and steambath temperature setting will be
displayed.
• Press the STEAM button to make adjustments.
Page 2
