10
Installation Of All-Round Mounting Set
11.0
Installing Mounting Set
11.1
1.
Define the position of the joystick.
When the USB connection points toward the user, a forward movement of the joystick
will result in a forward movement of the wheelchair. If needed, you can change
this positioning in steps of 90° with the mo-Vis Configurator Software.
2.
Determine which of the 2 slots you will user to guide the cable.
3.
Place the 2 M5 locknuts in the first Mounting Plate.
4.
Secure the Mounting Plate with the 4 M5 bolts to the base of the joystick housing.
5.
Place the adaptor 6mm mounting set on the rod.
6.
Secure the Mounting Plate with the 2 M5 bolts.
The All-Round Mounting Set (IDM-46) is sold separately and is only required for mounting
the All-Round Joystick to the Power Chin Boom.
CAUTION
Tighten the screws firmly, but not excessively. Excessive force may damage the unit.
NOTICE
The All-Round Joystick cable will not feed through the arm of the Power Chin Boom.
Summary of Contents for IDM-PCB-L
Page 46: ...a Notes 20 0 ...
Page 47: ...b Notes 20 0 ...
