Stealth IDM-PCB-L, User Manual

Page: 15 / 48

6
Installation Of Power Chin Boom Unit 10.0
Motor Unit Installation 10.1
To install the Power Chin Boom Motor Unit, carefully follow the directions of this manual.
To install the Power Chin Boom Mounting Hardware, follow the instructions in the
correlating installation manual.
Depending on the needed placement of the Power Chin Boom, angle and height
adjustments can be made to the hardware.
If more hardware is needed, the Chin Boom Brackets can be ordered as a separate
package. Please call Stealth Products for more information.
CAUTION
The connections must be at the bottom (default position) or at the lower part
(tilted position).
CAUTION
The mount must be inside the wheelbase.
Lead the i-Connect Power Source Connector to a fused connection on the wheelchair
battery and secure the i-Connect Power Source Connector to the wheelchair.

An IC24PS-QL or IC24PS-RN is required in order to connect from the power source to the
chair. Please specify when ordering which connector you will need.
WARNING
Do not connect the i-Connect Power Source Connector to the wheelchair battery or
another battery source while installing or adjusting the Power Chin Boom Motor Unit or
Power Chin Boom Arm to avoid any unwanted movement.