17
Configuration Software
14.0
9.
When
Parameters
is selected, a list of parameters will be shown, depending on the device
that is connected to the pc.
By selecting one specific parameter you wish to adjust, the view on the right will display
the stored
Default, Minimum and Maximum Values
of the specific parameter.
This parameter can now be changed by entering a new value in the textbox, by clicking
the arrows next to the text box, or by selecting a new value from the drop down box.
Values that are being changed will be shown in green.
Attention: When a parameter is changed without clicking the Apply
button, the new values are not remembered. Once another parameter
setting is selected, the previous parameter will go back to the
original setting.
Click
Apply
to write the temporary value in the device. You can immediately test it, but the
new value is not stored yet.
If you lose connection, any changes you made will be lost. If you would like to store the
parameter values into the device, click on the
Save
icon or click in the menu bar,
File-Save
.
The new parameter values will now be stored permanently in the device.
Summary of Contents for IDM-PCB-L
Page 46: ...a Notes 20 0 ...
Page 47: ...b Notes 20 0 ...
