Stealth Products i-Fit IFCS, Owner'S Manual

Page: 46 / 60

36
Installation Instructions 12.0
Buckle Installation 12.5
Swivel Buckle
The swivel buckle is used on the following i-Fit products:

Positioning Systems

Y-Straps
Step 1: To release the swivel buckle from the belt, push down on the button in the center of
the male swivel buckle.
Step 2: Remove the male swivel buckle and attached belt from the female swivel buckle.
Make any adjustments necessary.
Step 3: To reattach swivel buckle, slide the buckle into the housing. An audible click should
occur when the male buckle has been fastened into place, indicating that the belt is
secure. If the button does not latch and hold secure, immediately refrain from using the
product.
1
2
3
CAUTION
Before engaging the chair, check that all buckles and straps are clear from any
mechanical components to prevent damage.