Stealth Products i-Fit IFCS, Owner'S Manual

Page: 42 / 60

32
Installation Instructions 12.0
Y-Strap Installation 12.3

One end of the Y-Strap should cross over the shoulder at mid-clavicle and the other cross
underneath the axilla on the same side of the body.

The other end of the Y-Strap, with a single attachment point, should cross in front of the
client
’ s body at an angle and attach on the opposite side, lower than the other two
attachment points.
Step 1
:
Position the upper portion of the Y-Strap above and below the rotated shoulder and
attach belt anchors to rear face of solid back.
Step 2: Stretching the lower strap diagonally across the trunk, attach the lower portion of the
Y-Strap to the rear face of the solid back.
Step 3: Using the tension straps on the top portion of the Y-Strap, draw the rotated shoulder
back until proper position is accomplished.
3
1
2
DANGER
Due to the possibility of a user sliding while in-chair, unmonitored use of anterior
thoracic support devices could pose a serious choking hazard. Continually ensure
that the user is sitting upright and that the thoracic support device does not