background image

iii 

Introduction 

3.0 

Before you install or begin using Stealth Products’ i-Fit line, it is important 
that you read and understand the content of these installation and operating 
instructions. These installation instructions will guide you through the options 
and possibilities for the product.  
Instructions are written with the expressed intent of use with standard           
configurations. They also contain important safety and maintenance               
information. For further assistance, or more advanced options, please                   
contact your supplier or Stealth Products at (512) 715-9995 or toll free at                           
(800) 965-9229. 
Always keep the operating instructions in a safe place so they may be 
referenced as necessary. 
All information, pictures, illustrations, and specifications are based on the 
product information that was available at the time of printing. Pictures and 
illustrations shown in these instructions are representative examples and                
are not intended to be exact descriptions of the various parts of the product. 
 

Ordering Documentation 

You can download additional copies of this owner’s manual by accessing the 
Stealth website (www.stealthproducts.com) and searching “i-Fit Owner’s 
Manual” in the search bar at the top of the page. 

Summary of Contents for i-Fit IFCS





























































Reviews: