Stealth Products i-Fit IFCS, Owner'S Manual

Page: 47 / 60

37
Installation Instructions 12.0
Side-Release
The Side-Release Buckle is used on the following i-Fit products:

Pelvic Belts

Positioning Systems

Chest Straps

Y-Straps
Step 1: To remove the side release buckle from the belt, push the prongs of the male buckle
in, releasing the buckle from the female housing.
Step 2: Remove the male side-release buckle and attached belt from the female buckle. Make
any adjustments necessary.
Step 3: To reattach the side-release buckle, slide the buckle into the housing. An audible ‘ click ’
should occur when the male buckle has been fastened into place, indicating that the belt
is secure. If the buckle does not latch and hold secure, immediately refrain from using
the product.
1
2
3

Back Pack Straps

Shoe Holders

Foot Positioners
CAUTION
Before engaging the chair, check that all buckles and straps are clear from any
mechanical components to prevent damage.