19
Software Configuration
DANGER
ALWAYS
disengage motors completely
before programming a wheelchair. Failure to do so
may lead to serious injury and/or property damage.
R-net™ Omni Setup
NOTICE
An R-net™ programming dongle is required.
Mode
Switch mode to drive,
power seating, or On
Board Programming
(OBP).
Navigation
Up and Down buttons
to navigate the menus,
Right button to open
a menu item and Left
button to return to
previous menu.
Profile
Switch between preset
drive profiles and
activate device as
control.
Power
Turns chair ON or OFF.
Plus and Minus
Toggle settings or
changes value of the
highlighted parameter.
